Related topics

WinXP Pro won't boot up -- repair or re-install?
Now my machine won’t boot properly (at all). I get to the “log on to windows” screen, enter my password, and then it goes nowhere. It either locks on a solid blue screen, or I get a few various error boxes (with nothing in them, just yes/no). No matter what I hit the laptop either locks up or logs off.

won't boot after install
(WXP will install to the PATA drive if you don't!) You can enable the RAID 1 "Mirror" function before or after installation of XP. the RAID controller load during boot, it can see my drives, lists on of them as bootable but the IDE primary master/slave listing fromthe bios is empty and the system won't boot.

HELP! Linux won't boot!
There were only a few packages that caused an error during the install, but I I have to say it. Those packages _may_ have been very important. The fact they had errors is usually an indication that something is wrong. What were the error messages? What were the packeages? continued to finish the install. Now, after

10.2 using kernel 2.6.13 won't boot after install!
Norman Levin normanle...@attglobal.net comp os linux portable John Gordon wrote: I've tried RH 6.1 and Open Linux, but get these results: COL: goes through the entire install, but on reboot goes to run level 3 and sends a kill message, leaving the screen blank RH: starts to load the installer, then says can't find

System won't boot after Install.
Frank Lyons frly...@home.com microsoft public win98 fat32 NT 4.0 Won't Boot after Install to PM 3.05 NTFS Partition Previously when I had 95 and a 2.1 gig hard drive and FAT32 on 95 I had no trouble creating a NTFS partition and using PM 3.05 to boot to it and install NT 4.0 (even though claimed corrupt it

Cladera 2.3 hdd failure
Lee wrote: after installing mandrake 8.1 it doesn't boot from the created boot disk ! i got an asus a7v (promise udma 100) and thats probably the problem. i have 2 hd's conneted to the udma 100 ports, windows is on the first hd and the second is free for *x i've installed mandrake on the second hd and created a

windows won't boot anymore after installation of debian
Steve Hix se...@mac.com comp os linux powerpc In article <8fbtqv$88a$1@sshuraac-i-1. production.compuserve.com>, "Max Roeleveld" <dilleNOS...@wanadoo.nl> wrote: By starting from scratch, I finally got my system to boot after installation, and now it seems to work great. Good to hear (I've 'installed from scratch' at

Ultra 5 won't boot from HD after install
Install the latest verion of Red Hat Linux 7.2.X on that entire drive all by itself. I am sure it would work fine then. Just get a second drive for the other March 02, 2002 4:18 AM Subject: system won't boot after installation I installed redhat linux (tried both v6.0 and v7.2), but both give the same result

... won't boot after install.
ORG mailing freebsd bugs Synopsis: IBM (A,T,X Series) Thinkpad won't boot off any media after install of FreeBSD State-Changed-From-To: open->closed State-Changed-By: grog State-Changed-When: Sun May 27 18:06:29 PDT 2001 State-Changed-Why: IBM BIOS problem, solved by BIOS code update. Responsible-Changed-From-To:

Windows Update last night, now won't boot
It's been quite a while since I had to mess with dos disks to set up the dos partition because normally the Netware install goes smoothly. However, this time (and I've tried twice) the boot partition comes up unbootable after a full apparently successful install. It's incredible to me that reference is made to

Debian 3.02r doesn't boot off HD
Secondly, at one point in time, folks who wanted to dual boot boxes don't want parisc-linux mucking with primary boot path. My rp2430's primary boot path was not set, and after installation, PALO did not have the correct partition or path for the kernel. What does a "path pri ..." statement look like which will set

Won't boot after install: Not a system disk
Bongobob wrote: Ok, how do I fix the problem, Still can't boot, stays stuck on Windows XP? page "Uncle Grumpy" wrote: Bongobob <Bongo...@discussions.microsoft.com> wrote: I do have a home edition cd but I had to send in the unit to fix the mother board and it came back with media edition on it.

sony drx-510ul pc won't boot after install
Dave Uhring daveuhr...@yahoo.com alt solaris x86 On Sat, 08 Feb 2003 03:04:45 -0500, BG wrote: When the 1st CD is finished installing, the system won't boot what it has so far from the HD its being installed to. I had to Bood CD 1of2 again, then select boot from HD and it would then boot what it had loaded so far,

Won't boot after install
I rebooted to the LinuxPPC 2K CD, selected partitions and performed the default installation. Now the system freezes with a gray screen with a cursor (before happy mac). It won't boot with any media*. I tried resetting PRAM (2 and 3 chimes...) I CAN get the the system to boot when I unplug the 1G drive from the

MBR conflicts after install from ME pc
During the install if you get a message Windows can't write to the disk or an AV error then boot to the BIOS and temporarily disable BIOS anti-virus. If you have a problem with the first reboot after the install go into the BIOS and temporarily disable Plug and Play. Restore both BIOS settings after several good

system won't boot after installation
After the Install Repair copies files to the Windows directory, it ... reboots itself and continues to keep trying to boot up and then going back into a reboot. Since I bought the computer (Sony VAIO from Sony) with Win XP Pro already installed, I wasn't the one who set up the Administrator's password.

RH7.1 won't boot after installation
It's just that it won't boot from the boot manager. finally, we have even tried to install the OS using the "dangerously dedicated" mode when doing the fdisk, but again, after the computer starts up, it gives us the error message "read error". Again, we can start with the boot floppy, and successfully boot with

LinuxPPC 2000 on 7200 won't boot after installation
ORG sol lists freebsd bugs Synopsis: IBM (A,T,X Series) Thinkpad won't boot off any media after install of FreeBSD State-Changed-From-To: open->closed State-Changed-By: grog State-Changed-When: Sun May 27 18:06:29 PDT 2001 State-Changed-Why: IBM BIOS problem, solved by BIOS code update. Responsible-Changed-From-To:

At witts end, please help - Linux won't boot after install- wierd.
In article <7e56df9c.0211202049.4de4b...@posting.google.com>, elixo...@yahoo.com (Eli) wrote: I have a Powermac g4 450 AGP w/ 128mb ram I did a fresh install of Jaguar 10.2 i tried on three different Hard drives. 2 maxtors and 1 seagate. I get the same thing at boot up off all three.

Problem after install win2k won't boot
I've also tried to hang the cdrom on the onboard aha-7895 scsi, and then Solaris will install only partly - it quits after ca. 75%. But it won't boot after installation unless I boot from the cdrom again and choose to boot from the disk - even setting autoboot to on and choosing the mirror to be the default boot